Doctor Referred View COA

CBD Cream - Cooling Formula - Single Unit

CBD+CBG Topical Cooling Cream with Menthol and Aloe

2,000mg CBD2,000mg CBG0.0% THC3.4 fl oz · 100mL
  • Advanced hyper-emulsion that absorbs quickly
  • Immediate cooling + warming sensation on application
  • Clean, non-greasy finish for daily use
$35.00
40mg per mL · 3.4 fl oz (100mL)
In stock
LegitScript
Certified
Doctor
Referred
Made
in USA
3rd-Party
Lab Tested
LegitScript Certified
Verified CBD Topicals
Made in USA
cGMP-compliant facility
3rd-Party Lab Tested
SC Labs ISO/IEC 17025
Doctor Referred
Recommended by practitioners

What's Inside

Key Ingredients

CBD Cooling Cream combines botanicals with CBD and CBG, 0.0% THC, in a formula engineered for layered, sustained cooling. Every ingredient is listed below.

2,000mg CBD20mg per mL
2,000mg CBG20mg per mL
4,000mg Total CannabinoidsPer 100mL bottle
0.0% THCThird-Party Lab Tested
CBD + CBG

Cannabidiol, Cannabigerol

INCI: Cannabidiol, Cannabigerol

2,000mg CBD per bottle, paired with 2,000mg CBG. 0.0% THC. Dispersed via Adaptive Density Emulsion for uniform distribution.

Concentration 20mg / mL
Cannabinoid

Cannabigerol (CBG)

INCI: Cannabigerol

The "parent" cannabinoid — 2,000mg per bottle, paired 1:1 with CBD. Rare in topicals at this concentration. Broadens the cannabinoid profile beyond standard CBD-only formulas.

Concentration 20mg / mL
Base Carrier

Aloe Vera

INCI: Aloe Barbadensis Leaf Juice

The primary base of the formula, listed ahead of water on the label. Aloe juice gives CBD Cooling Cream a hydrating base with a cooling feel on the skin.

Primary Cooling Agent

Menthol

INCI: Menthol

The primary cooling ingredient. Menthol gives a cooling feel that begins 15 to 45 seconds after application, peaks at 3 to 7 minutes, and fades smoothly over 10 to 20 minutes.

Terpene

β-Caryophyllene

INCI: Beta-Caryophyllene

20mg per mL. A terpene naturally occurring in hemp, black pepper, and cloves. Contributes to the formula's resinous, earthy aroma and botanical depth.

Concentration 20mg / mL
Emollient

Shea Butter

INCI: Butyrospermum Parkii (Shea) Butter

A rich emollient that moisturizes, softens, and conditions the skin as part of the cream base.

Botanical Extract

Cat's Claw

INCI: Uncaria Tomentosa Extract

A South American vine bark extract. One of the distinctive plant-forward ingredients in the botanical blend.

Essential Fatty Acids

Evening Primrose Oil

INCI: Oenothera Biennis (Evening Primrose) Oil

A plant oil rich in gamma-linolenic acid (GLA), an essential fatty acid. Conditions and softens the skin as part of the cream base.

Humectant

Hyaluronic Acid

INCI: Sodium Hyaluronate

A humectant that hydrates the skin. It keeps skin from feeling dry or tight as the cooling feel fades.

Botanical Depth

ChamomileCalendulaLavenderBoswelliaEucalyptusPeppermintDandelionCucumberRosemaryOrange PeelGeraniumLemon Balm
SC Labs Tested
Aloe-Based Formula
0.0% THC, Batch Tested
Made in the USA
LegitScript Certified
Professional Application Guide

How to Use CBD Cooling Cream in Your Practice

CBD Cooling Cream is made for professional settings. The Adaptive Density Emulsion gives 3 to 6 minutes of predictable slip, a gradual cooling arc, and a clean finish for hands-on sessions.

Application Protocol
01

Prime the Pump

Dispense 1 to 2 pumps (≈1 to 2mL) into your palm. One pump covers a small area. Use two pumps for a larger area or full-back application. The airless pump dispenses a consistent amount every time, with no waste and no contamination.

1 pump ≈ 1mL. Airless pump prevents oxidation and maintains formula integrity.
02

Apply with Long, Deliberate Strokes

Use long, deliberate strokes, not aggressive rubbing. This spreads the cream evenly across the skin and keeps the cooling feel gradual. You get a smooth, gradual cooling arc instead of a sharp menthol spike.

Cooling feel begins within 15 to 45 seconds and peaks at 3 to 7 minutes.
03

Work Within the Glide Window

CBD Cooling Cream gives 3 to 6 minutes of predictable slip under moderate pressure, suited to IASTM, cupping, and hands-on techniques. The Adaptive Density Emulsion keeps a consistent viscosity throughout the glide phase, so your tools and hands move without drag.

Glide Window
0 min 3 min 6 min 10 min
Compatible with IASTM tools, cupping, and hands-on techniques. Won't leave linens oily or stain fabrics.
04

Clean Finish: Tape & Tool Ready

After the glide phase, CBD Cooling Cream leaves a clean, dry finish that does not interfere with kinesiology tape adhesion. Clients can dress, tape, or move immediately. The cooling feel continues for 10 to 20 minutes after application.

Cooling feel: 10 to 20 minutes total. No residue.
Retail Conversion Script

"I'm going to apply a small amount to this area today. You'll notice a cooling sensation that builds over a few minutes and fades gradually. If you like how it feels, I have it available for purchase so you can use it at home as part of your daily routine."

Cooling Arc Timeline
Adaptive Density Emulsion: gradual cooling feel
Onset
15–45 sec
Peak
3–7 min
Sustained
7–15 min
Fade
10–20 min

Gradual fade with no residue. The cooling feel tapers off after the session.

Compatible Practice Settings
Chiropractic Pre-adjustment application. Apply along the back 2 to 3 min before the adjustment.
Physical Therapy Apply between exercise sets for a cooling feel during an active session.
Massage Therapy 3–6 min predictable glide. Non-staining, non-greasy finish. Compatible with all draping and linen protocols.
Acupuncture Post-needling application. Apply to distal points or along meridian pathways after needle removal.
IASTM Instrument-assisted glide medium. Consistent viscosity throughout the tool stroke. Clean finish after the session.
Cupping Apply before cup placement so the cups glide smoothly. The cooling feel continues during and after the cupping session.
Sports Medicine Post-event application. A cooling cream for athletes after training or competition.
Podiatry Foot and lower leg application. Non-staining formula, so clients can put on socks and footwear right after application.
IASTM Compatible
Cupping Compatible
Kinesiology Tape Friendly
Non-Staining Linens
Non-Greasy Finish
Made for Daily Use
Practitioner FAQ

Every Question Your Clients Will Ask. Answered.

15 questions across formulation, professional use, cannabinoid science, wholesale, and compliance.

0 of 15 reviewed
Still have questions?

Our practitioner support team responds within 1 business day.

Contact Support
These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

The Adaptive Density Emulsion (ADE) is a shear-responsive, oil-in-water emulsion that changes viscosity under pressure. During hands-on strokes, it thins to provide 3 to 6 minutes of predictable glide. At rest, it sets to a clean, non-greasy finish with no residue on linens, instruments, or clothing.

The cooling feel arrives in stages: menthol first (15 to 45 seconds), eucalyptol through the middle phase (3 to 7 minutes), and camphor as the feel fades over 10 to 20 minutes. This predictable sensory arc gives clients a consistent experience from session to session.

CBD Cooling Cream contains CBD 2,000mg per 100mL (20mg/mL) and CBG 2,000mg per 100mL (20mg/mL), for 4,000mg per 3.4 fl oz (100mL) bottle, with 0.0% THC. The formula also contains β-Caryophyllene at 20mg/mL, a terpene naturally occurring in hemp, black pepper, and cloves.

It uses the same CBD + CBG standard as Pro Cream and Pro Roll-On, which are also 0.0% THC.

Key ingredients: Menthol (cooling feel), Camphor (cooling-to-warming aromatic note), Eucalyptus Oil (eucalyptol, mid-phase cooling feel), CBD and CBG (cannabinoids), β-Caryophyllene at 20mg/mL (terpene), Eugenol (warm aromatic, oil-phase blending).

Botanical complex: Arnica Montana, Boswellia Carterii, Cat's Claw (Uncaria Tomentosa), Evening Primrose Oil, Chamomile, Calendula, Lavender, Hyaluronic Acid, Aloe Vera, Oat Kernel Flour, Allantoin, Tocopherol (Vitamin E), Jojoba Oil, and Shea Butter. The full ingredient list is published on this page.

Apply one pump (approximately 1mL) to the application area using long, deliberate strokes rather than aggressive rubbing. This spreads the cream evenly and keeps the cooling feel gradual. The formula provides 3 to 6 minutes of predictable glide under moderate pressure.

Use it before an adjustment, between exercise sets, or as a post-session finish. The clean finish after the glide phase means no residue gets in the way of kinesiology tape adhesion, IASTM tool contact, or cupping suction. For first-time clients, apply a small test amount to the inner forearm and wait 3 minutes before full application.

CBD Cooling Cream is designed for use across chiropractic, physical therapy, licensed massage therapy, acupuncture, IASTM, cupping, sports medicine, and podiatry. The non-staining, non-greasy formula will not mark linens or clothing.

The clean finish after application means it does not interfere with IASTM tool contact, cupping suction, or kinesiology tape adhesion. The gradual cooling feel suits clients who prefer a milder menthol sensation.

CBD Cooling Cream is a topical product for the skin, so we do not claim that it treats, cures or prevents any condition. It is for external use only. Clients with questions about their own health or medications should speak with their physician.

Document your recommendation in the client record and advise clients to disclose all topical products to their prescribing physicians. These statements have not been evaluated by the FDA. This product is not intended to diagnose, treat, cure, or prevent any disease.

No. CBD Cooling Cream contains 0.0% THC. It uses CBD and CBG, the same standard as Pro Cream and Pro Roll-On.

Every batch is tested by SC Labs, with results on a batch-specific Certificate of Analysis. All three formulas are 0.0% THC.

All three formulas use CBD and CBG with 0.0% THC. CBD Cooling Cream is the cooling formula in a cream texture.

β-Caryophyllene at 20mg/mL is included as a terpene. Pro Cream is the warming formula, and Pro Roll-On is the max cooling formula in a roller.

Every production batch is tested by SC Labs, an ISO/IEC 17025 accredited independent laboratory in Santa Cruz, CA. Testing covers cannabinoid potency (HPLC method), heavy metals (ICP-MS), pesticides (200+ compound panel via LC-MS/MS and GC-MS/MS), microbials (USP standards), residual solvents, and terpene profile.

Batch-specific COAs are publicly available through the SC Labs database. No batch ships without passing all panels. Each batch COA lists its cannabinoid potency and THC result. COAs are available to all wholesale partners upon request.

Wholesale accounts are available to licensed healthcare practitioners including: Doctors of Chiropractic (DC), Physical Therapists (PT/DPT), Licensed Massage Therapists (LMT/CMT), Acupuncturists (LAc/DAc/DAOM), Pharmacists (PharmD/RPh), Medical Doctors and Osteopathic Physicians (MD/DO), Nurse Practitioners (NP/APRN), Physician Assistants (PA-C), Naturopathic Doctors (ND), Podiatrists (DPM), and Sports Medicine Physicians.

A valid professional license is required. Apply at wholesale.kannacocbd.com. Submit the form and you can sign in and order right away. Once your account is open, you get wholesale pricing, batch-specific COAs, client sample packs, and dedicated practitioner support.

CBD Cooling Cream (3.4 fl oz) is $35.00 per bottle wholesale, in packs of 4, 8 or 12 ($140, $280, $420). Sample packs (24 count, 2.5 mL each, $44.50) are available for practices that want to introduce clients to the formula before committing to full-size inventory.

The smallest order is one 4-pack. All wholesale orders include batch-specific COAs, and the product has a 2-year shelf life.

At the $84.99 MSRP, a 12-pack at $420 retails for $1,019.88, a gross margin of $599.88 (about 59%) at 100% sell-through ($35.00 cost vs. $84.99 MSRP).

The 12-pack is the featured starting point. Client sample packs (2.5mL) are available so clients can try the formula before you commit to full-size retail inventory.

Yes. Kannaco is LegitScript certified, which means the company and its products have passed LegitScript's rigorous regulatory compliance review. LegitScript certification verifies that the company operates legally, makes accurate product claims, and meets safety standards. This certification is required for advertising on Google and Meta, and is recognized by major payment processors.

For practitioners, LegitScript certification provides documented third-party verification of Kannaco's compliance posture — a meaningful differentiator when recommending a CBD product to clients and when responding to questions from licensing boards or insurance carriers.

Federal rules for hemp-derived products are changing: a ban on synthetic cannabinoids starts November 12, 2026, and new total-THC limits, including a per-container cap, take effect December 11, 2026. State rules vary. State regulations vary — practitioners should verify their state's specific rules regarding CBD retail in professional settings. Most state licensing boards for chiropractic, physical therapy, massage, and acupuncture permit the retail sale of topical wellness products.

CBD Cooling Cream's LegitScript certification and batch Certificates of Analysis support your documentation. We recommend consulting your state licensing board or a healthcare attorney for jurisdiction-specific guidance.

Use experiential, sensory language (how it feels, smells and finishes): "a cooling cream with menthol and aloe," "a cooling feel on the skin," "a clean, non-greasy finish," "part of a daily self-care routine." CBD Cooling Cream is a topical product for the skin, so do not say it treats, cures or prevents any condition. Do not reference specific diagnoses.

Always include: "For external use only. These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease." Document your recommendation in the client record. Provide clients with the batch COA upon request.